![]() If load balancing or fail-over setups are required, we could have either multiple trunks configured on either the Mediation Server to multiple Gateways or vice-versa. All signalling between the two systems is passed through this SIP Trunk. In order to establish communications between the Lync 2010 and the innovaphone PBX, we need to establish one SIP Trunk between the innovaphone gateway and the MS Mediation server.Here is an example of a Direct SIP deployment.Ĭonfiguration innovaphone with Microsoft Lync Server 2010 - Media Bypass ON and TSIP mode.This option could be changed also by a Powershell command: Set-CsTrunkConfiguration -EnableReferSupport $false. As a result, the option "Enable REFER Support" (on Microsoft Lync Control Panel at Voice Routing-> Trunk Configuration) must be disabled. Note2: Some SIP REFER methods are not supported by innovaphone PBX. In this article we will describe separately the two possible configurations. Note: In order to use Microsoft Lync Server 2010 Media Bypass feature it is required to set Media-Relay and exclusive codec options on the innovaphone gateway. When this feature is activated, it permits a direct audio termination on the Lync client instead of the Mediation Server. The Microsoft Lync Server 2010 has a new feature called Media Bypass. It can be done using TCP (TSIP) or TLS (SIPS), the use of SRTP is supported in both cases. The SIP connection is made between an innovaphone gateway and a Microsoft Mediation Server. It's not the goal of this article to describe the complete configuration of a Lync or innovaphone PBX system, but only the required settings to enable the connection of both systems. In the following sections we describe the configuration steps for a Direct SIP connection between both systems. 0) integration into an existing innovaphone PBX environment. This document is intended to support you with the Microsoft Lync Server 2010 (Version. Innovaphone PBX V9 build 90733 or higher (since v9 HotFix5).The product is certified according to the Unified Communications Open Interoperability Program – Lync Server program. The use of SRTP is for both connection methods optional. The connection can be done using SIP over TCP or TLS. This is a configuration guide describing the setup of a Direct SIP trunk between an innovaphone PBX and a Microsoft Lync Server 2010. 7.6.1 Calling from Innovaphone to Skype for Business Conference Room or issues with Call HOLD/Retrieve when having Encryption ON (Since v12r1).7.5 Incoming calls with T.38 offer to Lync.7.4 innovaphone MoH on MS Lync audio conference call issue.7.2 No Ringback tone for calls from the PSTN to Lync clients.5.4 Use SRTP with Microsoft Lync Server 2010.5.3 innovaphone with Microsoft Lync Server 2010 - SIP over TLS (SIPS). ![]() 5.2 innovaphone with Microsoft Lync Server 2010 - Media Bypass OFF. ![]()
0 Comments
Leave a Reply. |